1, before use, wipe the machine, face the slicer, first move the loading platform to the right, leak out the refueling port, add 5 drops of oil to it, and cross the loading platform several times to make the lubricating oil evenly distributed.

2, adjust the cutting thickness, first adjust the thickness to the maximum, and then adjust to the required thickness: after adjustment, open the fixture, put in the material, clamp, and drop the weight.

3, boot check: check whether there is a foreign body on the blade, check whether the tool protection plate is covered, check whether the grinding wheel is away from the blade.

4, after the check is correct, turn on the power, turn on the switch, let it operate automatically, the operator can not stay away from the equipment, in case of accidents.

5, after the end, first turn off the switch, power off, remove the waste and semi-finished products, open the tool protection plate, and clean the blade and load platform (careful blade sharp).