The slitting machine is commonly used for automatic slitting processing of items such as tape. During use, if there is a situation where the slitting tape sticks to the knife, the following measures need to be taken:
1. Discontinuing use
If the slitting machine experiences cutting tape sticking to the knife, it should be stopped in a timely manner to prevent further damage to the machine and affect production.
2. Clean the tape residue
Before removing tape residue, it is necessary to turn off the power supply of the slitting machine and carefully remove the tape residue using safety tools such as pliers, flat nose pliers, etc. to avoid injuring fingers or causing greater damage.
3. Maintain the tape cutting and sticking knife
Maintaining the tape cutting and sticking knife is the key to preventing the tape cutting and sticking knife from cutting. After each cutting, the tape residue on the cutting blade should be cleaned in a timely manner, and a clean cloth should be used to wipe the blade to prevent the tape from adhering to the cutting blade and affecting the next cutting work. In addition, lubricating oil can be used to maintain the cutting blade to improve its lifespan.
4. Replace worn cutting knives
If the cutting blade is severely worn or damaged, it should be replaced with a new one in a timely manner to ensure the normal operation of the machine and the cutting quality. When replacing the cutting knife, the same model and specifications as the original cutting knife should be selected, and calibration and adjustment should be carried out when replacing the cutting knife to ensure cutting quality and accuracy.
In short, the solution to the slitting machine's cutting tape and adhesive knife requires meticulous operation and correct maintenance, only in this way can the machine be guaranteed to operate normally and avoid accidental damage and production impact. Therefore, in daily work, it is necessary to regularly clean and maintain the slitting machine, check the wear of components regularly, and replace worn components in a timely manner to ensure the performance and lifespan of the machine.