1、 Installation steps of tape slitter
1. When pressing down the base of the machine base, first level it with shims. The deviation of unevenness in each direction shall not exceed 0.1mm per meter. After the machine is completely dry, it must be installed and commissioned. Tighten the foundation bolts.
2. During installation and disassembly, when lifting the work roll and precision machined parts, the wire rope shall not directly contact the machined surface, and the felt pad shall be paved to avoid scratches.
3. During installation, all contact surface seals and bolt connection surfaces shall be coated with a thin layer of grease.
4. Tighten all fastening bolts and foundation bolts symmetrically.
2、 Use of tape slitter
1. The multi-functional slitting machine adopts programmable design, and automatically switches the working mode of the production line according to the nature of the board, which can significantly improve the production efficiency and reduce the maintenance frequency of the tape slitting machine.
2. The telescopic hydraulic cylinder of tape slitter, uncoiler and winder is designed in an integrated way, with low failure rate.
3. The pinch feeder can automatically feed and synchronize with the production line.
4. The mainframe of the belt slitter adopts an integrated frame and an independent transmission structure, which can effectively improve the rigidity of the mechanical structure, reduce the vibration amplitude of the slitting blade, and improve the quality of the finished product.
5. The winding wire adopts tension winding and has a slipping structure, which can effectively improve the stability of mechanical operation.
6. The direct pressure tension damping structure uses wool felt with good elasticity and high friction coefficient as the fabric to ensure the smooth operation of the equipment in the production process; In addition, it is equipped with a pressure balancing device to balance the pressure on both sides of the pressure surface.
7. The hydraulic adjustable back pressure combination is adopted for the separating and pressing mechanism to stabilize the pressure, which will automatically rise with the increase of the coil diameter, and effectively press the materials all the time.
8. The automatic tension design of the finished roll, and the tape slitter can improve the tightness of the finished roll.