The segment machine is a device for cutting. The most important part is the blade. So how does the tension of the barrier be debugged? What are the reasons when there is a problem with the blade? What are the problems? how should I solve this?

1. The roller surface of the seminars and the process design is unreasonable: the material is cut horizontally on the drum (commonly known as the left and right), wrinkled (unbalanced material), and the roller (the material is too light air to air Excessive entry), these problems will directly lead to incarnation of the closure, which will be wavy edge, tilted edge, etc.

2. Excessive tension of receiving volumes: it will directly lead to the production of the finished product, the drum shape, etc.

3. Mechanical failure of the equipment: For example, the bearing damage of the transmission roller or the empty roller causes the shaft to move; the dynamic balance accuracy of the roller is too low;

4. Design problems of tension system: The matching of the tension system has problems that will cause the tension to be uncontrollable and generate this situation;

5. Selection problems in the form of papers: There are many ways to collect the volume. You must choose the form of central rolls, surface rolls, central surface rolls, central surface rolls, centers sliding, etc. according to the different characteristics of the product;

6. The choice of cutting tools: cutting, cutting, pressing, and rolling these cutting forms depends on different material characteristics to choose.

7. Other details: static electricity, equipment operation, raw material characteristics and other issues.

The above is the reasons and results of various problems with the blade of the scorer machine. I believe that after everyone knows these, I must know how the tension of the division machine is adjusted.